Posted by Paul on March 20, 2003 at 15:49:21:
In Reply to: Re: Visit my site for Tips... posted by Chuck on March 19, 2003 at 20:42:07:
Getting the drain plug out the first time was a chore. They must use alot of locktight on that bolt.
Anyhow I layed on the ground and used a closed end wrench. Make sure your turning the right way, since your upside down its easy to get backwords. Once I broke it loose, I was able to take it the rest of the way out by hand.
I wore gloves to prevent burns form the hot motor (should be warmed up to let the oil run out smooth) and to prevent busting my knuckles on the bike or the gorund should I slip.
The filter was easy. 3 hex bolts came out (they were tight also but I was able to stand so it wasnt so bad.
I used a small pry bar to get the casing off after the bolts were removed.
The oil filter just pops in and out. There is a small spring gadget that keeps it in place on the casing cover.
Don't overfill your oil.. I found out the hard way!